Boat decking
Synthetic Teak Decking for RIBs
Grippy, hard-wearing and light, Flexiteek 3 is the deck we have been fitting to leisure and commercial RIBs for more than 20 years, including decks for the RIB builder Ribeye.
Why Flexiteek suits RIBs
A RIB deck takes a beating: wet boots, fishing gear, dive tanks, fuel and constant spray. It has to give confident footing at speed, it should not add much weight to a light, fast boat, and it needs to be easy to hose down at the end of the day. Flexiteek 3 ticks each of those boxes.
- Grip: the textured grain gives secure footing wet or dry.
- Weight: at around 4.5kg per square metre, Flexiteek 3 is up to 35% lighter than comparable synthetic teak, so it adds little to the boat's overall weight.
- Easy cleaning: rinse with fresh water or use a domestic pressure washer at up to 135 bar.
- Hard-wearing: it copes with anchors, cool boxes, dive tanks and years of footfall, and scuffs can be sanded out.
Decks designed around the boat
Every RIB deck is templated to the individual boat and CNC-cut in our Hamble workshop. Many owners choose planks swept to follow the shape of the tubes, finished with margin boards and snapes, which really shows off a RIB's lines. Straight-laid planks, logos and lettering are all possible too.
We have supplied Ribeye with decks for more than 20 years, so if you have seen a Ribeye on the water, there is a good chance you have seen one of our decks.
Recent RIB projects
Ribeye Prime 821
Scrubbed Flexiteek with black caulking, swept to the boat's shape with margin boards and snapes.
Frequently asked questions
Is Flexiteek slippery on a RIB?
No. Flexiteek 3 has a textured grain that gives confident footing wet or dry, which is why it is fitted to leisure and commercial RIBs.
Will a synthetic teak deck add much weight to my RIB?
Flexiteek 3 weighs around 4.5kg per square metre and is up to 35% lighter than comparable synthetic teak, so the added weight is small.
Can you replace the foam or EVA deck on my RIB?
Yes. We regularly remove EVA foam decks and replace them with Flexiteek 3, which lasts far longer and can be refreshed rather than replaced.
Do you supply decks for RIB builders?
Yes. We run factory-fit programmes for boat builders, including Ribeye, as well as one-off refits for owners.
What our customers say
“
I had the rubber decking trim on a Williams jet tender replaced with Flexiteek and they did a great job. Also reasonably priced. I would definitely use them again.
Richard Cunningham
Talk to us about your deck
We have been fabricating and fitting decks from our workshop in Hamble for more than 20 years, for owners and boat builders across the UK and Ireland. Tell us about your boat and we will come back with straight answers and a tailored quote.